MicroX II Autoclavable Tags
| Description | |
|---|---|
| Dimensions/tolerance(in) | 2.01 x 1.43 x 0.30 (+/- 0.02) |
| Dimensions/tolerance (mm) | 51 x 36.3 x 7.5 (+/- 0.5 mm) |
| IP rating | IP69K |
| Attachment | Screws (Rivet hole, M3), pop rivets (3mm), welding |
| Application temperature | -67°F to +302°F (-55°C to +150°C) |
| Operating temperature | -40°F to +185°F (-40°C to +85°C) |
| Read range on metal, 4W EIRP (2W ERP) | Up to 33 ft (10 m) |
| Weight | 0.98 oz (28 g) |
| Compliance | FDA Class I, RoHS, CE, ATEX |
Part Number
- Autoclavable Micro XII US: X1130-US140-H3
- Autoclavable Micro XII EU: X1130-EU140-H3
The MicroX II autoclavable version is specially designed to withstand the rigors of sterile processing, and OR workflows which involves repeated of autoclave and chemical cleaning cycles.
| Functional Specifications | |
|---|---|
| RF air protocol | EPCGlobal Class1Gen2; ISO18000-6C |
| Operating frequency | UHF 902-928MHz (US); 866-868 MHz (EU) |
| IC type | Alien Higgs-3 |
| Memory configuration | 96-EPC bits; 512-bit user memory |
| Functionality | Read / write (user programmed) |
| Memory – expected read / write cycles | 100,000 cycles at 77°F (25°C) |
| Data retention | Up to 50 years |
| Read rate | 400 tags per second for 96-EPC bit number |
| Warrenty (limited) | 1 year |
| Applicable surface | Metal surfaces |
| Material | Engineering-grade nylon polymer |
| Color | Charcoal |
| Weight | 0.98 oz (28 g) |
| Application | Medical devices |
| Mounting surface | Metal |
| Performance Characteristics | |
|---|---|
| Read range on metal (2W ERP) | Up to 33 ft (10 m) |
| Polarization | Linear |
| Environmental and Industry Compliance | |
|---|---|
| FDA class | Class I |
| Compression strength | 181 psi (1250 kPa) |
| IP classification | IP69K 3 |
| Standard compliancy | RoHS (EU Directive 2002/95/EC) , CE (EU version) |
| Operational temperature (MIL STD 810-F) | -40°F to +185°F (-40°C to +85°C) |
| Application temperature (MIL STD 810-F) | -67°F to +302°F (-55°C to +150°C) |
| Humidity | |
| Operational humidity | 5%-95% non- condensing |
| Storage humidity | 5%-95% non- condensing |
| Cleaning and Disinfection Process (ANSI/AAMI ST79) | |
|---|---|
| Chemical sterilization for decontamination Liquid chemical sterilants include glutaraldehyde, hydrogen peroxide, hydrogen peroxide-peracetic acid combinations, sodium hypochlorite, and peracetic acid | Pass |
| Thermal (hot water) disinfection • Washer-sanitizers, washer-decontaminators, utensil washers, and cart washers reduce microbial contamination by means of cleaning agents, hot water, rinsing, and drying. • Pasteurization equipment provides cleaning and high-level disinfection at water temperatures of 65°C to 77°C (150°F to 170°F) for a contact time of at least 30 minutes. • Washer-disinfectors provide a cycle of cleaning, rinsing, disinfection, and drying at temperatures that are usually higher than those of washer-sanitizers |
Pass |
| Thermal sterilization for decontamination Saturated steam can be used to decontaminate devices capable of withstanding high temperatures (121°C to 135°C [250°F to 275°F]) and pressures (16 to 35 psig). Washer-sterilizers provide cleaning and rinsing followed by exposure to saturated steam at temperatures of 121°C to 135°C (250°F to 275°F). | Pass |
| Ultrasonic cleaner 30 KHz for 30 min | Pass |
| Dry heat sterilization 160°C for 2h, or 170°C for 1h, or 180°C for 30min | Pass |
| Disinfection by light C wave ultraviolet and wavelength range is from 200nrn to 275nrn | Pass |
| Detergent enzyme cleaner | Pass |
| Autoclave sterilization 121°C and 115Kpa for 1000 cycles | Pass |
| Installation instructions |
|---|
| Step1: The tag will be fixed with metal bracket, • Screws (Rivet hole, M3) • Pop rivets (3mm) |
| Step2: The tag with bracket can be attached in several methods: • Screws (Rivet hole, M3) • Pop rivets (3mm) • Welding |
| Product Dimensions and Weight | |
|---|---|
| Dimensions (mm) | 51 x 36.3 x 7.5 |
| tolerance | +/- 0.5 mm |
| Dimensions (in) | 2.01 x 1.43 x 0.30 |
| tolerance | +/- 0.02 in |
| Rivet hole diameter | 0.126 in +/-0.008 (3.2 mm +/- 0.2) |
Specialities
- Withstands repeated autoclave cycles
- Resistant to chemical cleaning process
- Designed to meet FDA requirements
Applications
- Autoclavable surgical trays tracking
- Healthcare equipment management
